Free laser cutting tools

Generators for CO2 and diode lasers that make clean SVG and DXF cut files. Everything runs in your browser – no sign-up, no uploads.

5 tools · SVG & DXF

About these laser cutting tools

These tools make vector cut files (SVG and DXF, in millimetres) for CO2 and diode lasers. Each file opens at the right size in LightBurn, xTool Creative Space, Inkscape and most CAD programs. Cut lines are red and engrave or score lines are blue, on separate layers, so you can set power and speed for each.

Start with the gauges. The kerf and focus test cards show how much material your laser burns away and where it cuts cleanest. Enter that kerf in the box makers and the finger joints press-fit without glue. The nesting tool then packs your parts onto a sheet to waste less material.

Material thickness is the most important setting. Measure your sheet with calipers, as 3 mm plywood is often 2.7–3.2 mm, and enter the real value. A finger-joint box designed for 3.0 mm will be loose on 2.7 mm stock and won’t close on 3.2 mm.

Questions

Do the files work with LightBurn?

Yes. Import the SVG or DXF. Sizes are in millimetres and open at 1:1 scale.

CO2 or diode laser?

Both. The files are plain vectors. A diode laser needs slower speeds or more passes for 3 mm plywood and can’t cut clear acrylic, so check what your machine can cut.

What is kerf and why does it matter?

Kerf is the width of material the beam burns away, typically 0.1–0.25 mm. Without allowing for it, slots come out too wide and joints are loose. The kerf gauge measures it and the box makers add it back.

Can I cut cardboard or paper?

Yes. The cardboard box template generator makes dielines with separate cut and score lines, for a laser, a cutting plotter or scissors.

All sections