Two-Layer BenchNew

Baby on Board sign – free two-colour STL

The classic yellow diamond for your car’s rear window: a pram and “Baby on Board” in black, with a keyhole for a suction cup. Add your baby’s name, change the colours, and download the two-colour STL.

  • Free
  • No sign-up
  • Private: runs on your device
Template

Each template has its own artwork and text, so it works without an upload. Change anything afterwards.

Your image (top colour)

Your image stays on your device. Bold drawings and logos you have the right to use trace best.

Base shape
Text (top colour)

Leave all three lines empty for artwork only.

Holes and mounting

A keyhole: push the head through the round entry, the neck hangs in the slot above.

Pockets on the back, open at the bed: press the magnets in after printing. They only hold on steel.

Thickness
Preview colours

Base

Top layer

Drag to rotate – turn it over to see the holes or magnet pockets.

Prefer to ask your AI? Make this from ChatGPT or Claude →

This is the Two-Colour Sign & Badge Maker with the Baby on Board sign template loaded. Change the text, colours, shape and holes, or upload your own image.

About the Baby on Board sign

A Baby on Board sign tells drivers behind you to give a little more room and patience. It also tells rescuers that a small child may be in the car, which is why it works best in the rear window, where it can be seen, and not on a bumper.

This template makes the familiar yellow diamond about 125 mm across, a size that reads well through a rear windscreen without blocking your view. The pram and words print in a second colour on top, so they stay sharp and won’t fade the way a printed sticker does.

Baby on Board sign print tips

FilamentPETG or ASA. A rear window in summer gets hot enough to warp PLA.
Suction cupClear cups with an 8–9 mm mushroom head. Measure yours and set the keyhole to match.
VisibilityHigh contrast reads best from a distance: black on yellow, or white on blue or red.
Add a nameUse the third text line for a name. Keep it short so the letters stay large.

Baby on Board sign questions

Where should a Baby on Board sign go?

In a rear side window or the lower corner of the rear windscreen, where it doesn’t block the view in your mirrors or cover a wiper’s path. Don’t put it on the front windscreen.

How big should it be?

About 120–130 mm across is the usual size. It can be read from the car behind and still leaves most of the window clear. Change the width and everything scales with it.

Can I print it without a multi-colour printer?

Yes. Add one colour change at the height shown under the preview: the yellow base prints first, then the black pram and text.

How do I print it in two colours?

Everything prints flat, face up. On a single-colour printer, add a filament change (colour change) in your slicer at the height shown under the preview – that is the base thickness. On an AMS, MMU or tool changer, download the ZIP and load the base and top STLs together as one object (they share the same coordinates), with a filament for each; or download the Colour 3MF, which opens in Bambu Studio and OrcaSlicer with both parts already on their own filaments.

Other templates

Making a text-only desk or door sign? Use the 3D Sign Generator. For a rubber-stamp style block see the 3D Stamp Generator, and for spray-paint cut-outs the Stencil Generator.

Want tall, curved standing letters with your logo instead? Try the Revolved 3D Logo Sign.