Two-Layer BenchNew

Kid on Board sign – free two-colour STL

A “Kid on Board” diamond for the car window, with a star above the text and a suction-cup keyhole. Swap the star for your own drawing or add a name.

  • Free
  • No sign-up
  • Private: runs on your device
Template

Each template has its own artwork and text, so it works without an upload. Change anything afterwards.

Your image (top colour)

Your image stays on your device. Bold drawings and logos you have the right to use trace best.

Base shape
Text (top colour)

Leave all three lines empty for artwork only.

Holes and mounting

A keyhole: push the head through the round entry, the neck hangs in the slot above.

Pockets on the back, open at the bed: press the magnets in after printing. They only hold on steel.

Thickness
Preview colours

Base

Top layer

Drag to rotate – turn it over to see the holes or magnet pockets.

Prefer to ask your AI? Make this from ChatGPT or Claude →

This is the Two-Colour Sign & Badge Maker with the Kid on Board sign template loaded. Change the text, colours, shape and holes, or upload your own image.

About the Kid on Board sign

Kids outgrow a pram picture quickly. This version keeps the diamond shape drivers recognise but swaps the pram for a star and says “Kid on Board”, which suits school-age children and car-pool cars.

The default is blue with cream text, but you can pick your child’s favourite colour, replace the star with a heart or paw, or upload their own drawing. A child’s drawing traces well if it is drawn in thick black marker.

Kid on Board sign print tips

Your child’s drawingUse thick black marker on white paper and photograph it in good light. Use Threshold to clean it up.
FilamentPETG or ASA for the window. A sign on a school bag or bedroom door is fine in PLA.
Two kids?Change line 1 to KIDS, or use line 3 for both names.
MountSuction-cup keyhole for the car, or change Holes to “two holes” to hang it on a bag or door.

Kid on Board sign questions

Can my child draw the picture?

Yes. Set Artwork to upload and choose a photo of the drawing. Bold lines on plain paper work best, and thin pencil lines may disappear. Use Detail to drop stray specks.

What is the difference from the Baby on Board template?

Only the starting point: Baby on Board starts with a pram on yellow, and Kid on Board starts with a star on blue. Both use the same diamond, keyhole and sizes, and you can change everything on either.

Will the colours fade in the sun?

Much less than a sticker. The colour is the plastic itself, not a printed ink. ASA is the most UV-resistant, and PETG lasts well behind glass.

How do I print it in two colours?

Everything prints flat, face up. On a single-colour printer, add a filament change (colour change) in your slicer at the height shown under the preview – that is the base thickness. On an AMS, MMU or tool changer, download the ZIP and load the base and top STLs together as one object (they share the same coordinates), with a filament for each; or download the Colour 3MF, which opens in Bambu Studio and OrcaSlicer with both parts already on their own filaments.

Other templates

Making a text-only desk or door sign? Use the 3D Sign Generator. For a rubber-stamp style block see the 3D Stamp Generator, and for spray-paint cut-outs the Stencil Generator.

Want tall, curved standing letters with your logo instead? Try the Revolved 3D Logo Sign.