Two-Layer BenchNew

L-plate – free two-colour STL

A learner “L” plate: a bold red L on a white square, with magnet pockets on the back. Check your local rules for the official size before you drive with it.

  • Free
  • No sign-up
  • Private: runs on your device
Template

Each template has its own artwork and text, so it works without an upload. Change anything afterwards.

Your image (top colour)

Your image stays on your device. Bold drawings and logos you have the right to use trace best.

Base shape
Text (top colour)

Leave all three lines empty for artwork only.

Holes and mounting

A keyhole: push the head through the round entry, the neck hangs in the slot above.

Pockets on the back, open at the bed: press the magnets in after printing. They only hold on steel.

Thickness
Preview colours

Base

Top layer

Drag to rotate – turn it over to see the holes or magnet pockets.

Prefer to ask your AI? Make this from ChatGPT or Claude →

This is the Two-Colour Sign & Badge Maker with the L-plate template loaded. Change the text, colours, shape and holes, or upload your own image.

About the L-plate

An L-plate shows that the driver is a learner. This template prints a bold red L on a white square with magnet pockets on the back, so it can be moved between cars and taken off when a qualified driver is at the wheel.

The default size is 178 × 178 mm, the size used for UK L-plates. Rules differ by country (some use a P-plate, a different colour or a different size), so check your local rules and change the letter, size or colours to match. Change the L to P, R or N for other learner and probation schemes.

L-plate print tips

Two neededMany places need a plate on the front and the back. Print two.
MagnetsFour 12 × 3 mm neodymium discs. Steel panels only, not bumpers or glass.
ColourKeep the red and white high contrast. A faded or pink L may not count.
FilamentASA lasts best outdoors. PETG is fine for a season of lessons.

L-plate questions

Is a 3D-printed L-plate legal?

A plate that meets your local rules for size, colour and position is generally fine, whatever it is made of. Rules differ by country, so check the official guidance where you drive before you use it.

Can I make a P-plate or a green L?

Yes. Change line 1 to P (or any letter) and pick the colours your scheme uses, for example a red D for Wales or a green P for new drivers.

Will it fit on my printer?

At 178 mm it fits most 220 mm beds. For a 180 mm bed it just fits, so turn off the skirt or brim to save space.

How do I print it in two colours?

Everything prints flat, face up. On a single-colour printer, add a filament change (colour change) in your slicer at the height shown under the preview – that is the base thickness. On an AMS, MMU or tool changer, download the ZIP and load the base and top STLs together as one object (they share the same coordinates), with a filament for each; or download the Colour 3MF, which opens in Bambu Studio and OrcaSlicer with both parts already on their own filaments.

Other templates

Making a text-only desk or door sign? Use the 3D Sign Generator. For a rubber-stamp style block see the 3D Stamp Generator, and for spray-paint cut-outs the Stencil Generator.

Want tall, curved standing letters with your logo instead? Try the Revolved 3D Logo Sign.