Two-Layer BenchNew

Pet tag – free two-colour STL

A small round tag for a collar: a paw print and your pet’s name in a second colour, with a hole for the split ring.

  • Free
  • No sign-up
  • Private: runs on your device
Template

Each template has its own artwork and text, so it works without an upload. Change anything afterwards.

Your image (top colour)

Your image stays on your device. Bold drawings and logos you have the right to use trace best.

Base shape
Text (top colour)

Leave all three lines empty for artwork only.

Holes and mounting

A keyhole: push the head through the round entry, the neck hangs in the slot above.

Pockets on the back, open at the bed: press the magnets in after printing. They only hold on steel.

Thickness
Preview colours

Base

Top layer

Drag to rotate – turn it over to see the holes or magnet pockets.

Prefer to ask your AI? Make this from ChatGPT or Claude →

This is the Two-Colour Sign & Badge Maker with the Pet tag template loaded. Change the text, colours, shape and holes, or upload your own image.

About the Pet tag

A pet tag is small enough to print in about 20 minutes and personal enough to make a good gift. This one is a 34 mm round disc with a paw print and your pet’s name in a second colour, and a hole for the split ring on the collar.

Put a phone number on line 2 for an ID tag. Pick a bright colour so the tag is easy to spot in grass, and size it down for cats and small dogs.

Pet tag print tips

Size34 mm suits medium dogs. Use 25–28 mm for cats and small dogs, and 38–40 mm for big dogs.
ThicknessKeep the base about 2 mm. Thinner tags snap at the hole.
Layer height0.12 mm keeps small text crisp.
FilamentPETG flexes rather than snaps. PLA works but is more brittle.

Pet tag questions

Can I add a phone number?

Yes. Put it on line 2 and set its text size smaller than the name. On a 34 mm tag, a full number reads best at 38 mm or larger, or on a second tag.

Will it survive a dog chewing it?

A plastic tag is lighter and quieter than metal, but a determined chewer can damage it. Use PETG, keep the base at least 2 mm, and check it now and then.

Can it be a keychain or bag tag instead?

Yes. Change the name and artwork. The hole takes a standard split ring. For name-only keychains, see the Name Keychain Generator.

How do I print it in two colours?

Everything prints flat, face up. On a single-colour printer, add a filament change (colour change) in your slicer at the height shown under the preview – that is the base thickness. On an AMS, MMU or tool changer, download the ZIP and load the base and top STLs together as one object (they share the same coordinates), with a filament for each; or download the Colour 3MF, which opens in Bambu Studio and OrcaSlicer with both parts already on their own filaments.

Other templates

Making a text-only desk or door sign? Use the 3D Sign Generator. For a rubber-stamp style block see the 3D Stamp Generator, and for spray-paint cut-outs the Stencil Generator.

Want tall, curved standing letters with your logo instead? Try the Revolved 3D Logo Sign.